ASTM A269 316 bakin karfe nada bututu sinadaran bangaren

Labarun Callanish suna samuwa kawai ga masu biyan kuɗi da abokan ciniki waɗanda ke kan gwaji a halin yanzu.Idan kun riga kuna da bayanan shiga, da fatan za ku shiga ƙasa don ci gaba.
Haƙiƙa na duniya, abokantaka na mai amfani na ƙarfe da kasuwanni da masana'antu masu alaƙa, isar da mahimman bayanai cikin sauri kuma a mafi yawan lokuta suna ba da isasshen sharhi da fassarorin samar da irin wannan sabis ɗin labarai na kusa.

Bakin Karfe CoilTubes:

Bakin Karfe Coil Tube ASTM A269 TP304 / TP304L / TP310S / TP316L Bright Annealed 1/4 INCH
(1) Sunan kayayyaki: Austenitic Bakin Karfe Coil Tubes
(2)Hanyar tsari: sanyi ja / sanyi pilgered
(3) Material: TP304, TP304L, TP316, TP316L, Dual grade 317L, 316Ti, TP321

(4) Standard: ASTM (ASME), EN, DIN, JIS da dai sauransu.
(5) Bayani:a) OD:1/4″ -3/4″
b) WT: 0.028 "- 0.065"
c) Tsawon: na musamman, max: 1000m/pc.
(6)Sharuɗɗan bayarwa: annealed & pickled
(7) Aikace-aikace: yadu amfani da man fetur, sunadarai, kantin magani, abinci, inji, sararin samaniya,

yakin masana'antu.

(8) gas ɗin tukunyar jirgi, sassan dumama ruwan zafi, hardware, jigilar kaya, wuta da sauran su

masana'antu.
(9)Marufi: cushe da buhunan saƙa, sa'an nan kuma an kiyaye shi ta hanyar katako na teku.

Matsayin Abu:

Darajoji:

301, 304, 316, da sauransu kamar yadda abokin ciniki ya ƙayyade.

Aikace-aikace/Masana'antu:

Ana amfani da bututun bakin karfe da aka yi lankwasa a cikin aikace-aikace iri-iri, gami da:

• Manifold majalisai don masana'antar sufuri
• Layukan samar da ruwa na ruwa don dalilai na masana'antu
• Bumpers don kare samfuran OEM
• Gidaje don tsarin kula da ruwa
• Hannun Tubular da aka yi amfani da su a cikin kayan aikin OEM da injina.

Masana'antun kasar Sin na kokarin kara farashin karafa mai zafi a kasuwar GCC.Koyaya, masu siye sun fi son kayan Indiya dangane da farashi da gajeriyar lokutan bayarwa.Callanish ya samu labarin cewa masana'antun Koriya ta Kudu na sa ido kan kasuwar GCC, kuma Hyundai Karfe na shirin ziyartar yankin a cikin kwanaki masu zuwa.
A makon da ya gabata, wani kamfanin niƙa na Indiya ya kulla wata babbar yarjejeniyar bututu a kan matsakaicin farashin $640/t a Hadaddiyar Daular Larabawa.
Niƙa ta Indiya tana ba da wannan makon don SPHT-2 da SS400 2mm+ boron maki ana saka su akan $630-640/ton, yayin da SAE 1006 birgima na ƙarfe don jigilar kayayyaki na Satumba shine $650-660/ton CFR GCC..Hakanan ana samun makin Sinanci SS400 da SAE 1006 2mm+ akan $650-660/t CFR don jigilar kayayyaki na ƙarshen Satumba/ƙarshen Oktoba.
A gefe guda, ana ba da SAE 1006 2mm + daga Koriya ta Kudu shuka a $ 670 / t, wanda shine nau'in sasantawa don tayin da aka yi don jigilar kaya a watan Satumba.Duk kwatancen sun dogara ne akan tashoshin jiragen ruwa na CFR GCC.
A cikin Hadaddiyar Daular Larabawa, mai siyar kuma ya sami tayin mafi ƙarancin 2,000 t na 0.34-0.97 mm SPCC/1B sanyi birgima (CRFH) daraja 0.34-0.97 mm (CRFH) daga China akan farashin dala 700 akan kowace ton a cikin UAE don jigilar kaya a watan Satumba.Makon da ya gabata, masu siyayya sun ba da umarnin 500t na Sinawa 2mm+ DX51D galvanized coil don jigilar Satumba a $810/t CFR Jebel Ali.Makarantun Indiya da Koriya suna ba da kayan iri ɗaya akan dalar Amurka 950/t akan sharuɗɗan Jebel Ali don jigilar kaya na Satumba.
Kasuwar Saudiyya dai ta yi kasala, farashin bai canza ba tun makon da ya gabata.Kokarin da masana'antun sarrafa karafa na kasar Sin suka yi na kara farashin ya ci tura.Masu saye sun fi son kayan Masarawa saboda an keɓe su daga harajin shigo da kayayyaki a Saudi Arabiya.
An ba da rahoton cewa masana'antun Sinawa da Masar suna ba da ƙarfe mai zafi mai nauyin 1.2mm SPHT-1 don isar da saƙo a watan Satumba akan $730/t da $735/t a Jeddah, bi da bi.Tayin da kasar Sin ta yi wa gabar tekun Gabashin Saudiyya ta kai dala 710 kan kowace tan a Damam.
Maƙerin naɗa mai zafi ɗaya tilo a Saudi Arabiya an san shi yana ba da tushe mai daraja SPHT-1 3 mm naɗaɗɗen nada mai zafi don yin birgima a watan Oktoba akan dala 770 akan kowace tan da aka kai wa ɗakunan ajiya na abokan ciniki.